紙箱觸線作為紙箱生產廠家的一項重要工藝，用于壓平線(垂直瓦楞紙線)，對糾正紙箱問題起著關重要的作用。
As an important process of the carton manufacturer, the contact line of the carton is used to flatten the line (vertical corrugated line), which plays an important role in correcting the problem of the carton.
紙板接觸線的精度是瓦楞紙箱生產質量的關鍵。現在,即使是的生產線生產過程的紙板掛在中間,兩邊不一致,導致縱切肉板精度誤差+ / - 1毫米,和高檔紙箱的接觸線精度要求+ / - 1毫米之內,如何避免紙板原始縱向切割錯誤,減少紙板板接觸線錯誤的過程中接觸線是自動選擇的關鍵線觸摸機器。
The accuracy of the contact line is the key to the production quality of corrugated box. Now, even if the cardboard of the most advanced production line is hung in the middle, the two sides are inconsistent, resulting in the accuracy error of the longitudinal cutting of the meat board + / - 1mm, and the accuracy requirement of the contact line of the high-grade cartons + / - 1mm. How to avoid the original longitudinal cutting error of the cardboard, and how to reduce the contact line error of the paper board in the process of the contact line is the key line touch machine for automatic selection.
(1)“滾筒式”線對撞機在精度上能保證對紙盒的高精度要求，而抖動蓋的尺寸也不能保證。
(1) The "drum type" line collider can guarantee the high precision of the carton in terms of precision, and the size of the shaking cover can not be guaranteed.
“一步式”線對撞機比輥型線對撞機在直線對撞機的精度,如果“一步”的過程處理“刀”平直度的問題,應該是確保盒子的準確性高搖蓋,但瓦楞紙箱廠家和設備操作的高要求。(3)自動龍門”雙直線電機采用兩個手工單機碰線單元在同一指南,使用二級單位的計算機伺服控制的移動接觸線,以確保高箱,在二級行接觸單元和二次觸摸后單元移動凸輪定位紙板,紙板前端觸摸板定位后的兩組觸線單元串聯,如模切機的影響,前輥蓋與紙箱的高精度可達+ / - 0.5毫米切割紙板縱向誤差積累到后端抖動蓋。既保證了線碰撞的精度，又避免了縱向切割的精度誤差。機器的精度可以滿足自動包裝有限公司的要求。它們大多用于上述情況:
The accuracy of the "one-step" line collider is higher than that of the roller type line Collider in the linear collider. If the "one-step" process deals with the problem of "knife" straightness, it should be to ensure the accuracy of the box with high swing cover, but the corrugated box manufacturers and equipment operators have high requirements. (3) The double linear motor of automatic gantry adopts two manual single touch line units in the same guide, and uses the moving contact line controlled by the computer servo of the secondary unit to ensure the high box. After the secondary line contact unit and the secondary touch unit move the cam positioning paperboard. The two groups of contact line units after the front touch board positioning of the paperboard are connected in series, such as the influence of die-cutting machine, The high precision of the front roll cover and the carton can reach + / - 0.5mm, and the longitudinal error of the cutting paperboard can accumulate to the rear shaking cover. It not only ensures the accuracy of line collision, but also avoids the accuracy error of longitudinal cutting. The accuracy of the machine can meet the requirements of automatic packaging Co., Ltd. Most of them are used in the above situations:
1.紙板太壞，或紙板的線容易爆裂，用紙板壓線時，會出現水平壓線折疊不夠;
1. The paperboard is too bad, or the line of the paperboard is easy to burst. When pressing the line with the paperboard, there will be insufficient folding of the horizontal pressing line;
2.有些紙箱會有邊緣印刷(臥式壓線上有印刷)，紙板壓線后無法印刷，所以印刷后需要單機觸摸;
2. Some cartons will have edge printing (there is printing on horizontal pressing line), and the cardboard cannot be printed after pressing line, so it needs to be touched by a single machine after printing;
3.將使用一些小的批量更改用例。
3. Some small batch change cases will be used.
4.有些紙板太硬，客戶手工包裝時很難折疊和搖動蓋子，還需要一臺機器去接觸電線
4. Some cardboard is too hard for customers to fold and shake the cover when packing by hand, and a machine is needed to contact the wire
主要原因是以上四種，其他情況下很少能用來觸摸電線機。
The main reason is that in other cases, it is rarely used to touch the wire machine.
以上是
瓦楞紙箱廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://m.ywjbs.com
The above is the relevant content introduced by the corrugated box manufacturer for you. To learn more, please visit the website: http://m.ywjbs.com
