一、對塑料托盤承載重力影響較大的材料是其制造材料。如果所有材料都是由新材料和添加的其他添加劑制成的，那么這些塑料托盤在各個方面(動載荷、靜載荷、貨架載荷)的承載重力性能相對較好。
1、 The material that has great influence on the bearing gravity of plastic tray is its manufacturing material. If all materials are made of new materials and other additives, these plastic pallets have relatively good gravity bearing performance in all aspects (dynamic load, static load, shelf load).
塑料托盤全部或部分由回收和使用過的材料制成，具有更好的性能。因此，在采購時，我們要明確詢問其生產材料，在支付制造商送貨上門的費用時，檢查塑料托盤的質量。如果使用的材料不足，產品的使用也會受到影響。
Plastic pallets are made entirely or partially of recycled and used materials with better performance. Therefore, when purchasing, we should clearly ask about its production materials and check the quality of plastic pallets when paying the manufacturer's door-to-door delivery expenses. If insufficient materials are used, the use of the product will also be affected.
二、一些塑料托盤可以有內置鋼管。塑料托盤內置鋼管，可提高托盤的承載能力，延長托盤的使用壽命。
2、 Some plastic pallets can have built-in steel pipes. Steel pipe is built in the plastic tray, which can improve the bearing capacity of the tray and prolong the service life of the tray.
一般來說，貨架上的托盤都是采用內置鋼管設計的，因此當貨物裝在托盤上時，部分重量將施加在鋼管上，從而減少塑料托盤的負荷，并使塑料托盤的變形更小，從而延長了貨架的使用壽命。塑料托盤的使用壽命。貨架上的塑料托盤也可以很地裝載貨物。
Generally speaking, the pallets on the shelf are designed with built-in steel pipes. Therefore, when the goods are loaded on the pallet, part of the weight will be applied to the steel pipe, so as to reduce the load of the plastic pallet and reduce the deformation of the plastic pallet, so as to prolong the service life of the shelf. Service life of plastic tray. Plastic pallets on shelves can also safely load goods.
三、托盤的結構對托盤的承載能力有很大的影響。船子底式，上架承重能力相當好，其結構形式可滿足長度方向使用的手動液壓托盤、叉車、機械叉車的寬度方向。
3、 The structure of the pallet has a great influence on the carrying capacity of the pallet. Boat bottom type, the load-bearing capacity of the upper frame is quite good, and its structural form can meet the width direction of manual hydraulic pallet, forklift and mechanical forklift used in the length direction.
底部為方形框架結構，使底部更均勻，堆放時承受更大的重力。九足式承載重力低，底部受力九足，上部中空，適合攜帶較輕的貨物，自身重量較輕。雙面塑料托盤，上下結構相同，結構設計更合理，堆放時，下受力更均勻。因此，重力承載力也很大。總之，如果塑料托盤的結構設計合理，托盤體受力均勻。只要其他方面都正常，塑料托盤的承載能力就比較大。
The bottom is a square frame structure to make the bottom more uniform and bear greater gravity when stacking. The nine foot type has low bearing gravity, nine feet at the bottom and hollow at the upper part. It is suitable for carrying lighter goods and its own weight is light. The double-sided plastic tray has the same upper and lower structure, the structural design is more reasonable, and the lower stress is more uniform when stacking. Therefore, the gravity bearing capacity is also large. In short, if the structural design of the plastic tray is reasonable, the force on the tray body is uniform. As long as other aspects are normal, the bearing capacity of plastic tray is relatively large.
